Loading ...
Loading ...
Loading ...
CUSTO RESPONSIBIUTI
MAINTENANCE SCHEDULE
FiLL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation
Check Tire Prc-ssure
Check for Loose Fasteners
Sharpen/Replace Mower Blades
Lubrication Chart
Check B£ttery Level/Recharge
Ctean Battery and Terminals
Check Transa×fe Cooling
Adjust Blade Belt(s) Tension
Adjust Motion Drive Belt(s) Tension
Engine Oil Level
Change Engine Oil
Clean Air Filter
Clean Air Screen
Inspect Muffler/Spark Arrestor
Replace 0il Filter (If equipped)
Clear] Engine Cooling Fins
Replace Spark Plug
Replace Air Fitter Paper Cartridge
Replace Fuel Filter
1 - Chan£e mere often when operating under a heavy load or in hi 1 ambient tern
2 Se_vice mere often when operating in didy or dusty conditions.
3 - tf equipped with oil filter, change oil every 50 hours.
4 - Replace blades more often when mowing in sandy soil.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season,
- Once a year you should replace the spark plug, clean
or replace air filter, and check blades and belts for
wear_ A new spark plug and clean air filter assure
proper air-fuel mixture and help your engine run better
and last longer.
BEFORE EACH USE
. Check engine oil level
• Check brake operation.
Check tire pressure.
Check for loose fasteners.
SERVICE DATES
>aratures.
5 - If equipped with adjustable system.
6 - Not required if equipped with mairllenance-free battery.
7 - Tighten front axle pivot belt to 35 ft.-Ibs, maximum.
Do not ovedighten.
LUBRICATION CHART
(_SPINDLE (_)
(_FRONT
BEARING ZERK
G
OLUTCR
PIVOT(S)
®
P_VOTS
(_ SAE 30 OR 10W30 MOTOR OiL
(_ GENERAL PURPOSE GREASE
G) REFER TO CUSTOMER RESPONSIBlUTIES "ENG|NE" SECTION
IMPORTANT." DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI-
CANTS WILL ATTRACT DUST AND DIRT THAT W_LL SHORTEN
THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
1_ DERED GRAPHITE TYPE LUBRICANT SPARINGLY.
Loading ...
Loading ...
Loading ...