Loading ...
Loading ...
User Manual
————————————————————————————————————————————————
OVERVIEW
Product Description
This user manual is applicable to the latest R-series of Camius IP cameras (BoltX5R, Iris5R, Spot8R,
Spot8RS). The list of the IP camera models covered by this user manual will be kept updated periodically.
Camius IP cameras are digital online surveillance cameras embedded with a Web server and capable of
independent operation, giving user access to real-time monitoring through a web browser or surveillance
software from any location.
Camius IP cameras comply with H.264/ H.265 / H.264+ / H.265+ / MJPEG high profile encoding standards.
Authorized remote users can gain access to real-time monitoring using the IP address or hostname or P2P
ID of the IP camera. Camius IP cameras are easy to install and operate.
Remote management allows different authorization levels for users.
The IP camera can be set to detect various events like an object moving in view of the camera or sound
picked up by the built-in microphone and then send an alert to the owner’s smartphone or a snapshot to
their Email address.
Technology
A high-performance single SOC chip is used as the media processor for audio/video acquisition,
compression and transmission/transfer. Standard H.264/ H.265 / H.264+ / H.265+ / MJPEG encoding
algorithms are applied to ensure clear and smooth video representation and transfer performance.
Embedded Web Server offers users access to real-time surveillance and remote control of front-end
camera.
Glossary & Defaults
•
IP camera or IPC or Device refers to the network camera!
•
The default factory IP address for IP camera is 192.168.1.168 unless DHCP is enabled on the
network; in which case the IP camera will be assigned an IP address by the gateway (router), and if
the IP camera was paired with a PoE NVR then it’ll be assigned an IP like 10.10.25.151 and in this
case the NVR manages access to the camera.
•
The default factory administrator username for IP camera is admin (in lowercase), the IP camera
will require the user to setup a password on first browser access, there’s no need to set a password
for a direct PoE connection with the Camius NVR.
•
The default Web port number is 80 and the default media (client) port number is 9988.
•
•
If the IP camera has a hard reset button, you can use it to reset the camera’s password and
settings.
Please note,!in case any of the information in this manual didn’t apply to the product please reach out to us
and we’ll make sure you get the updated information by submitting a support ticket using the following
link:!https://camius.com/support
This manual may change without prior notice as we’re constantly working on developing our products.
2
Loading ...
Loading ...
Loading ...