Loading ...
Loading ...
Loading ...
User Manual
2.2 Record
Select a stream mode between MainStream or Substream, in which you wish to record your device
• Record: Enable it if you wish your device to record
• Pre-record: enable it if you want the device to record 5 seconds before an event occurs, that reduces the
chance of an event not being!recorded.
• Netbreak: When the IP camera is disconnected from the network and only connected to the power
supply, it will automatically record to the camera's onboard SD card (this option is available to the IP
cameras which have an SD storage slot). Click on ‘Netbreak’ toggle to activate move if you wish to
enable it.
!
Tab ‘Schedule’ to select Recording Schedule. Once you selected your schedule, click ‘Save’. One grid in
the table is 30 minutes. Users can customize recording schedule according to their needs.
!
3. Event
3.1 Setup
MOTION DETECTION
Motion Detection [Video Motion Detection] is used to save valuable time while searching for an event or
incident in playback. It allows users to set detection areas under setup for IP cameras, a schedule is
available for detection hours and days. Video motion detection triggers recording and other actions on your
device.
You can set motion recording as the only recording method to save on disk space [SD card or the HDD of
the NVR, if the camera is connected to it] or activate motion recording along with normal 24/7 recording to
record everything while having easy access to video footage triggered by motion.
14
Loading ...
Loading ...
Loading ...