Loading ...
Loading ...
Loading ...
EN
35
Installation
www.bora.com
If necessary, lay the height adjustment plates [2]
underneath.
Place the height adjustment plates next to the sealing
tape [2].
6.7.4 Securing the cooktop
1
2
3
Fig. 6.36 Securing the cooktop
[1] Cooktop
[2] Installation clamp
[3] Fixing bracket
Secure the cooktop to the worktop [1] with the fixing
bracket [3] on the installation clamp [2] .
Tightening torque: max. 2 Nm
6.7.5 Establishing a connection with the
back wall
1
3
2
Fig. 6.37 Connection with the back wall
[1] Telescopic pull-out
[2] Adhesive tape
[3] Back wall of unit
Push the telescopic pull-out [1] until it is tight up
against the back wall of the unit [3].
With the telescopic pull-out the distance to the back
wall of the unit can be flexibly bridged.
Check that the telescopic pull-out [1] fits accurately, is
flush with the cut-out on the back wall of the unit [3]
and closes it off.
Secure the telescopic pull-out [1] to the back wall of
the unit [3] using the adhesive tape [2]
6.7.6 Inserting the activated charcoal filter
INFO Removing the filter – see Cleaning chapter,
Changing the filter
2
1
Fig. 6.38 Remove the lter replacement cover
[1] Filter replacement cover
[2] Inlet opening
Inside the inlet opening [2] pull the filter replacement
cover [1] out through the opening in the filter housing.
OBEN / TOP
2
1
Fig. 6.39 Activated charcoal lter
[1] Activated charcoal filter
[2] Grip strap
Remove the packaging from the activated charcoal
filter [1].
Position the activated charcoal filter correctly with the
help of the printed symbols (arrow left, grip strap [2]
right).
Hold the activated charcoal filter at both ends.
Bend the activated charcoal filter into a cylindrical
shape so that both ends of the filter are opposite each
other.
Loading ...
Loading ...
Loading ...