Loading ...
Loading ...
Loading ...
EN
20
Device description
www.bora.com
INFO Safety-relevant acoustic signals are always
emitted with the volume at 100%.
The system basically differentiates between two different
types of acoustic signals:
Acoustic signal Purpose
Short individual beep (0.1 s) Confirmation of a selection
Sequence of beeps Interaction required
Tab. 5.5 Sounds
5.3 How the cooktop extractor
works
Depending on the model you purchased, the cooktop
extractor can be operated as an exhaust air or a
recirculating air version.
Exhaust air mode
The air suctioned away is purified by the grease filter and
expelled into the open air via a duct system.
The exhaust air must not be expelled into:
a smoke or exhaust gas flue that is in operation
a shaft used for the aeration of rooms where fireplaces
are installed.
If the exhaust air is to be directed into a smoke or
exhaust gas flue that is not in use, the installation must
be checked and approved by the responsible heating
engineer.
Recirculation mode
The air suctioned away is purified by the grease filter and
an activated charcoal filter and fed back into the room in
which the appliance is installed.
To prevent odours in recirculation mode, an odour
filter must be used. For hygiene and health reasons,
the activated charcoal filter must be replaced at
the recommended intervals (see the Cleaning and
maintenance chapter).
INFO In recirculation mode, ensure sufficient ventilation
and aeration to expel humidity.
5.2.4 7-segment display
Multi-function display Meaning
Fan display
1
–
9
Power levels
ßp
Power setting
0
Inactive
A
Automatic extractor function
n
Automatic after-run
F
Filter service
Multi-function
display
0
0
0
Time indication
e.g.
E
Error code
Cooking zone indicator Meaning
Cooking zone
indicator
1
–
9
Power level
ßp
Power setting
v
Warming level (Pure)
,
Warming level 1 (X Pure)
:
Warming level 2 (X Pure)
*
Warming level 3 (X Pure)
v
,
Pan size recognition
0
Inactive
H
Residual heat indicator
(cooking zone is switched off
but still hot)
E
Error
Tab. 5.3 Meaning of the 7-segment displays
5.2.5 Lighting
INFO The operating panel has 2 different levels of
lighting (100% and 50%).
INFO On principle the system adapts the lighting to
the current operating scenario. Relevant display
elements are more brightly lit and irrelevant ones
are dimmed. Unavailable functions are faded out.
Lighting Use
100% Function is active and selected
50% Function is inactive but can be selected
0% (no indicator) Function is unavailable
Tab. 5.4 Lighting
5.2.6 Sounds
INFO The volume of the acoustic signals can be set in
the menu (0% to 100%).
INFO The acoustic signal for the power button cannot
be set to 0.
Loading ...
Loading ...
Loading ...