Loading ...
Loading ...
Loading ...
User Manual
18
Cleaning
WARNING
Before cleaning the appliance, make sure it is switched o and disconnected from the power supply.
Failure to do so can result in electric shock or injury.
• Dust behind the refrigerator and on the ground shall be timely cleaned to improve the cooling eect
and energy saving.
• Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft
cloth dampened with soapy water or diluted detergent.
• The interior of the refrigerator should be cleaned regularly to avoid odor.
• Please turn o the power before cleaning interior, remove all foods, drinks ,shelves, drawers, etc.
• Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda
and a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and
let it dry naturally before turning on the power.
• For areas that are dicult to clean in the refrigerator (such as narrow sandwiches, gaps or corners),
it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary,
combined with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterial
accumulation in these areas.
• Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the
interior of the refrigerator or contaminated food.
• Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted
detergent. Dry with a soft cloth or dry naturally.
• Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent,
etc, and then wipe dry.
• Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes), organic
solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may
damage the fridge surface and interior. Boiling water and organic solvents such as benzene may
deform or damage plastic parts.
• Do not rinse directly with water or other liquids during cleaning to avoid short circuits or aect
electrical insulation after immersion.
• Never use boiling water to accelerate defrosting as it may damage the plastic components.
• After everything is dry, place appliance back into operation.
• Allow approximately 1–2 hours for the cabinet to cool down again (depending on the length of time
the appliance was disconnected from the power).
WARNING
Never clean the unit with an abrasive, acid, oil or solvent based cleaning agent. Never use ammable
uids or sprays for cleaning as the fumes from these substances can create a re hazard or Explosion.
Defrosting
The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function.
Frost formed due to change of season or temperature may also be manually removed by disconnection
of the appliance from power supply or by wiping with a dry towel.
Mintennce nd Clening
Loading ...
Loading ...
Loading ...