Loading ...
Loading ...
Loading ...
User Manual
14
Reversing the Door Cont.
7. Install the reversed freezer door on the lower hinge, then install the middle hinge and cover the hinge hole
decorative cover.
8. Remove the upper left hinge cover and upper left hinge from the accessory bag. Place the refrigerated
door body on the middle hinge and install the upper left hinge. Finally, replace the hinge decorative cover
to the right side of the box body.
The images in this user manual are for demonstration purposes only. Your fridge may appear dierently.
9
cover hat
shaft sleeve
Stopper
shaft sleeve
Stopper
5. Change the refrigerator door:
Remove the cover plate of the upper end cover of the refrigeration door and the left decorative cover.
Install the upper shaft sleeve and the signal line of the door body to the other side and cover the
upper end cover plate. Take out the right decorative cover from the accessory bag and install it to
the other side of the upper end cover.
6. Change the freezing door:
1) Remove the shaft sleeve and cap of the upper end cover of the freezing door and install them at
the left and right swap positions.
2) Remove the door self-locking, door stop and shaft sleeve of the freezing door, take out the left
door self-locking from the accessory bag, install it on the left side of the lower end cover of the
freezing door, change the door stop and shaft sleeve to the left side of the lower end cover of the
freezing door.
7. Install the replaced freezing door on the lower hinge, then install the middle hinge and cover the
hinge hole decorative cover.
middle hinge
decorative cover
left decorative cover
Decorative cover
Middle hinge
10
2.4 Changing the Light
2.6 Energy saving tips
2.5 Starting
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.This
cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items
as needed at one time, and close the door as soon as possible.
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualified person.
Before putting any fresh or frozen foods, the refrigerator shall have run for
2-3 hours, or for above 4 hours in summer when the ambient temperatur
e
is high.
8. Remove the upper left hinge cover and upper left hinge from the accessory bag.
Place the refrigerated door body on the middle hinge and install the upper left hinge.
Finally, replace the hinge decorative cover to the right side of the box body.
decorative cover
Left upper hinge
Upper left hinge cover
Please pull out the plug in case of power failure or cleaning. Do not
connect the refrigerator to power supply within five minutes to prevent
damages to the compressor due to successive starts.
After transportation, please let the product stay for more than 2 hours before
turning on the power, otherwise it will lead to a decrease in cooling capacity
or a damage to the product.
Decorative cover
Left upper hinge cover
Left upper hinge
Loading ...
Loading ...
Loading ...