Loading ...
Loading ...
Loading ...
Page 6 of 6
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails
due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this
lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
R
R
R
R
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
If unable to fix any of the above issues, please consult a certified electrician.
During the first installation, need to test product
function in the test mode.
Night
Confirm that light is on after cover the sensor by
hand, move another dark position.and avoid direct
sunlight.
Slide the switch to Auto mode.
The product may be installed in a
dark position, or it is shielded from
the sun.
After strong light on the sensor for over 5 seconds,
if it goes out,replace the install position or remove
the object
Ensure that the product is not detected.
Time delay accumulates under test
model.
A sudden or artificial power break
within 3 seconds, entering the
manual override mode.
Turn off the power, the initial setting will be restored
after more than 5 seconds.
False triggering caused by a heat
source, such as a heater or dryer vent,
or heated
swimming pool.
Eliminate heat source or relocate fixture.
In the Off / Auto mode, the sensor
has been measured to move the
object,and the high level delay time
is superimposed.
Ensure that no long-term moving objects around
the product.
In the PC mode.
Slide the switch to Off / Auto mode.
The switch is not slid into the position
of any model.
Slide it again to the model you want.
Light bulb quality or matching
problem.
It is normal to replace incandescent lamp instead of
confirming function nomally, otherwise change the
bulb.
If the light will
not come on
Day
Night
If the light
flashes or
blinks
Night
SYMPTOM
DAY/NIGHT
POSSIBLE CAUSE
SOLUTION
Day
Test product functionality not in test
mode.
It is possible to install where there
is bright light.
In the off mode,When the motion
stops, the light will remain on for
the predetermined time set
(5 ~ 180 seconds), then the light
will turn off automatically.
On cloudy or overcast days,the light
may stay on longer than anticipation.
No corrective action needed.
If the light
stays on
There are passing cars and reflective
objects that interfere with the sensor.
Replace the installed position.