Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS (continued)
ASSEMBLY INSTRUCTIONS (continued)
Page 5 of 6
NOTE:
1. The sensitivity of the motion sensor will increase as the
environmental temperature gets cooler. For best performance,
gently clean the lens with a soft cloth every 1 or 2 months to
assure maximum sensitivity.
2. For best performance, install fixture at least 6 feet above
the ground. At such a height, the fixture will provide a
detection distance of up to 40 feet at 77 degrees
Fahrenheit. (See Fig.6)
3.The sensor detects across a detection range of 180 degrees.
(See Fig.7)
4. The sensor will be more sensitive to motion across its
detection path than motion directly towards it. (See Fig.8)
5. To reduce possible nuisances, do not mount the fixture
near a heat source like an air conditioner, vent or furnace
exhaust, or in a direction facing any reflecting object or
other light source.
CARE AND MAINTENANCE
● To clean, turn off and wipe with a damp, non-abrasive cloth.
TROUBLESHOOTING
If the light does not work at all:First check the following aspects
1. Make sure the wall switch and circuit breaker are on.
2. Make sure the wiring is correct.
3. Make sure the bulb is not burned out，or loose
use bleow chart for troubleshooting your security light
FUNCTION AND OPERATION (continued)
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326
Spare Parts List:
II JJ
Hex Nut
Washer
KK
Threaded Pipe
Glass
9998CS
LL
Decorated Cup
MM
NN
Finial
OO
Set Screw
X2
AA
BB
DD
EE
FF
GG
CC
Mounting Screw
X2
Green Grounding
Screw X1
Lock Nut
X4
Wire Connector
X3
HH
Rubber Pad
X2
Rubber Pad
Ball Nut
X2
Headless Screw
X2
HH
Rubber Pad
X2
Assembly Kit
5919MM (1 SET)
Assembly Kit
5920AA (1 SET)
Assembly Kit
5918MM (1 SET)
Mounting Plate
X1
5`
6`
10`
40`
Where you install your lantern is important:
Be sure the light is mounted straight on the wall;
otherwise, the detection distance may be limited.
Fig. 6 Fig. 7
180˚
Motion
Least sensitive
Motion
Most sensitive
Sensor
Fig. 8
Loading ...