Loading ...
Loading ...
Loading ...
U i ! !ii!i!,, I l,ll_llP I ............ ................................ : --" " ......... ' "I I_ _Ir_ "
SERVICE A DADJUSTMENTS
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
o Depress clutch/Drake pedal fully and set parking brake.
° Place motion control lever in neutral (N) position.
° Place attachment clutch in "DISENGAGED" position.
° Turn ignition key "OFF" and remove key.
° Make sure the blades and all moving parts have completely stopped.
° Disconnect sparkplug wire from spark plug and place wire whereit cannot come in contact with
plug.
, ............. , ............ , i, ,,_ _,_,i,,l_,l i i_l ,ill i,i _J,,iiJ,, , _ i i,_lm
. +
TO REMOVE MOWER (See Fig. 19)
Mower will be easier to remove from the right side of tractor.
• Place attachment clutch in "DISENGAGED" position_
o Move attachment lift lever forward to lower mower to its
lowest position+
• Roll belt off engine pulley.
= Disconnect clutch rod from clutch lever by removing
retainer spring.
° DiSconnect anti-sway bar from chassis bracket bY
removing retainer spnng.
° Disconnect suspension arms from rear deck brackets
by remOving retainer springs_
. Disconnect front links from deck by removing retainer
springs..
• Raise lift lever to raise suspension arms, Slide mower
out from under tractor.
IMPORTANT' IF AN ATTACHMENT OTHER THAN THE
MOWER IJECK IS TO BE MOUNTED ON THE TRACTOR,
REMOVE THE FRONT LINKS.
TO INSTALL MOWER (See Fig. 19)
° Raise attachment lift lever to its highest position,
° Slide mower undertractorwith discharge guardto right
side of tractor+
° Lower lift lever to its lowest position.
CLUTCH
SUSPENSION
ARMS
LEVER
RETAINER
SPRING
ENGINE
FRONT
LINK
SPRINGS
(BOTH SIDES)
RETAINER
SPRING
ANTI-SWAYBAR
RETAINER
SPRINGS
(BOTH SIDES)
FIG. 19
• Install mower in reverse order of removal instructions,
21
Loading ...
Loading ...
Loading ...