Loading ...
Loading ...
Loading ...
W415-1362 / A / 09.15.16
13
EN
97.1A
Remove the backing of the logo supplied and place on the glass viewing
door, as indicated.
½"(12.7mm)
LOGO
½"(12.7mm)
The insert can be equipped with a fl ashing kit to close off most appliance openings. Mount the fl ashing
inside the unit's outer shell using 4 securing screws. The fl ashing and trim are available in many fi nishes
to accent any room decor. Objects placed in front of the appliance should be kept a minimum of 48"
(1219mm) away from the front face.
NOTE: IF DESIRED, THE ON/OFF SWITCH CAN BE MOUNTED ON THE BOTTOM LEFT SIDE OF THE
APPLIANCE. SEE "OPTIONAL ON/OFF SWITCH LOCATION" ABOVE.
TRIM
FLASHING
ON/OFF SWITCH
OPTIONAL ON/OFF
SWITCH LOCATION
LEVELING
SCREW
VARIABLE SPEED SWITCH
GAS KNOB
PIEZO
IGNITOR
FLAME
ADJUSTMENT
KNOB
SECURING SCREWS
SECURING SCREWS
4.6 FLASHING KIT
UPPER LOUVRE
LOUVRE CLIP
4.7 FLUSH LOUVRE KIT, GI-1L (USED ONLY WITH S3600SB)
UPPER LOUVRES
Insert the back edge of the upper louvre into the
upper louvre clips, as shown.
LOWER LOUVRES
Secure the lower louvre assembly to the insert,
using the 4 screws supplied, as shown.
SIDE VIEW
4.8 LOGO PLACEMENT
Loading ...
Loading ...
Loading ...