Loading ...
Loading ...
Loading ...
BELTIN_51ALLAIION
•Insta[f new belt in reverse order of
removal
Mandrel
Pulley
* MaKe sure Deit 1S In _11 pulley y[DUV_
and inside all belt guides.
, Install mower in reverse order of
removal instructions,
Idler
Pulleys
Mandrel
Pulley
TO ADJUST BRAKE
Your tractor is equipped with an adjustable
brake system which is mounted on the
side of the transaxleo
If tractor requires more than six (6) feet
stopping distance at high speed in high-
est gear, then brake must be adjusted.
o Depress clutch/brake pedal and engage
parking brake°
o Measure distance between brake oper_
ating arm and nut "A" on brake rod.
° If distance is other than 1-3/4", loosen
jam nut and turn nut "A" until distance
becomes 1-3/4". Retighten jam nut
against nut "A".
° Road test tractor for proper stopping
distance as stated above_ Readjust if
necessary. If stopping distance is sti[f
greater than six (6) feet in highest gear,
further maintenance is necessary.
Contact your nearest aulhorized ser-
vice centeddepartment.
if-'°"°q ..Jam Wit.,,Eo0. ed,,Parkio0 ro,,e
Arm
TO REPLACE MOTION DRIVE BELT
Park the tractor on level surface. Engage
parking brake. For assislance, there is a
belt installation guide decal on bottom side
of left footrest.
° Remove mower (See"TO REMOVE
MOWER" in this section of this manual.)
° Remove belt from stationary idler and
clutching idler,
° Pull belt slack toward rear of tractor.
Carefully remove belt upwards from
transmission input pulley and over cool-
ing fan blades,
° Pull belt toward front of tractor and
remove downward from around engine
pulley.
° Install new belt by reversing above pro-
cedure_
Do Not touch this nut, If further brake adjust-
ment is necessary contact your nearest autho-
rized service center/depadment
25
Engine _---.-..__l/ .,-_
_nput putley "_N.__
Loading ...
Loading ...
Loading ...