Loading ...
Loading ...
Loading ...
ASSEMBLE GAUGE WHEELS TO
MOWER DECK
The gauge wheels are designed to keep
the mower deck in proper position when
operating mower. Be sure they are proper-
ly adjusted to ensure optimum mower per-
formance.
- Assemble gauge wheels with tractor on
a flat level surface.
° Adjust mower to desired cutting height
(See "TO ADJUST MOWER CUTTING
HEIGHT" in the Operation section of this
manual).
, With mower in desired height of cut po-
sition, gauge wheels should be assem-
bled So they are slightly off the ground.
Install gauge wheel in appropriate hole
with shoulder bolt, 3/8 washer, and 3/8-
16 locknut and tighten securely.
, Repeat for opposite side installing
gauge wheel in same adjustment hole.
Gauge Wheef
Mountin Bracket
=lderBolt
3/8_16
G _/heel
GI"iE.GKLlb"!
PLEASE REVIEW THE FOLLOWING
CHECKLtST_
v' All assembly instructions have been
completed,
No remaining loose parts in carton,
v' Battery is properly prepared and
charged. (Minimum 1 hour at 6 amps),
v' Seat is adjusted comfortably and
tightened securely°
v' All tires are properly inflated. (For
shipping purposes, the tires were
overinflated at the factory),
v' Be sure mower deck is properly leveled
sideqo-side/front-to.,rear for best cutting
results., (Tires must be properly inflated
for leveling),
v' Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside alt belt keepers,
IV' Check wiring. See that all connections
are still secure and wires are properly
clamped.
v' Before driving tractor; be sure free-
wheel control is in drive position,
WHILE LEARNING HOW TO USE YOUR
TRACTOR, PAY EXTRAATTENTtON TO
THE FOLLOWING IMPORTANT ITEMS:
,/ Engine oil is at proper level.,
,/ Fuel tank ts filled with fresh, Clean,
regular unleaded gasoline°
,/ Become familiar with all controls - their
location and function. Operate them
before you start the engine.
,/ Be sure brake system is in safe operat-
ing condition°
,/" it is important _o purge the transmission
before operating your tractor for the first
time. Follow proper starling and
transmission purging instructions (See
"TO START ENGINE" and "PURGE
TRANSMISSION" in the Operation
section of this manual).
11
Loading ...
Loading ...
Loading ...