Loading ...
Loading ...
Loading ...
SWITCH
See Figure 2.
To turn your drillON, depress the switch trigger. To
turn it OFF, release the switch trigger.
SELECTOR
TO INSTALL BATTERY PACK
• Lock switch trigger on your drill by placing the
direction of rotation selector in center position.
See Figure 2.
• Place battery pack in your drill. Align raised rib
inside ddll with groove on battery pack. See
Figure 4.
SWITCH
CENTERPOSITION TRIGGER
(LOCK) Fig. 2
VARIABLE SPEED
Thistoolhas a variable speed switchthat delivers higher
speed and torque with increased trigger pressure. Speed
iscontrolled bythe amount ofswitch trigger depression.
Note: You might hear a whistling or ringing noise from
the switch during use. Do not be concerned, this is a
normal part ofthe switch function.
TWO-SPEED GEAR TRAIN
See Figure 3.
Your ddll has a two-speed gear train designed for
drilling or ddving at HI or LO speeds. A slide switch is
located on top of your drillto select either HI or LO
speed. When using drill in the HI speed range, speed
will increase and unit will have less power and torque.
When using drill in the LO speed range, speed will
decrease and unitwill have more power and torque.
Use HI speed for fast drilling or driving applications
and LO speed for high power and torque applications.
LOSPEED TWOSPEED
GEARTRAIN(HI-LO)
HISPEED
Fig, 3
BATrERYPACK t
LATCHES
DEPRESSLATCHESTO
RELEASEBATFERYPACK Fig. 4
• Make sure the latches on each side of your
battery pack snap in place and battery pack is
secured in drill before beginning operation.
_, CAUTION: When placing battery pack in your
drill, be sure raised rib inside drill aligns with
groove on battery pack and latches snap in place
properly. Improper assembly of battery pack can
cause damage to internal components.
TO REMOVE BATTERY PACK
• Lock switch trigger on your drill by placing the
direction of rotation selector in center position.
See Figure 2.
• Locate latches on end of battery pack and
depress to release battery pack from your drill.
See Figure 4.
• Remove battery pack from your ddll.
Loading ...
Loading ...
Loading ...