Loading ...
Loading ...
Loading ...
HOOK-UP CABLES AND CONNECTORS
Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For
best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable.
®
300-Ohm Twin Lead Connector
This outdoor antenna cable must be connected to an antenna
Optical
Cable
adapter (300-Ohm to 75-Ohm). This cable is used to connect to an audio amplifier with an
..-,.-,-,W-Tr_ _ Optical Audio In jack. Use this cable for the best sound quality.
Phono Connector__ (_O_ _[_
Used on all standard video and audio cables which connect to
inputs and outputs located on the television's rear jack panel
and front control panel. [o_0'
____[_- @ D-SUB MINI 9-Pin Cable
This cable is used to connect to the RS232C input located on the
"F"Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the antenna
jack on the television.
S-Video (Super Video) Connector
This connector is used on camcorders, VCRs and laser- disc
players with an S-Video feature in place of the
standard video cable to produce a high quality picture.
rear panel so you can control some of your TV functions from an
external home control system.
HDMI Cable
This cable is used to connect your external devices such as Set-
Top-Boxes or DVD players equipped with an HDMI output con-
nection to the TV's HDMI input.
ANTENNA CONNECTIONS TO REAR JACK PANEL
VHF (75-Ohm) antenna/CATV (Cable TV)
When using a 75-Ohm coaxial cable system, connect CATV coaxial cable to the ANT
A (75-Ohm) terminal. If you have an antenna, connect the coaxial cable to the ANT
B terminal.
Tooutdoor antenna
or CATVcabb
VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or
UHF antenna leads to screws of the VHF or UHF adapter. Plug the adapter into
the antenna terminal on the TV.
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect
the cables to the antenna mixer. Consult your dealer or service store for the
antenna mixer.
To outdoor VHF
or UHFantenna
t
ANTA Fromoutdoor
antennaorFromUHFantenna CATVSyslem
¢
AntennaMixer
Loading ...
Loading ...
Loading ...