Loading ...
Loading ...
Loading ...
Installation Instructions
WALL PLENUM AND ARCHITECTURAL LOUVER INSTALLATION
• Install the appropriate wall plentma through the exterior wall in accordance with the Installation Instructions
provided with the plenum.
IMPORTANT: The wall plenum is not designed to carry structural loads.
Proper wall header construction is required. The plenum requires proper
flashing, shim and caulk for a weather resistant installation.
Proper header for
stru(tu ral support.
Apply proper (mdking
and fl_lshing.
Prop( fly square and
level plenum.
Architectural
Louver--RAVAL1
Exterior/OutsideWall
Wall Plenum
RAVWP6- 6"D x 19a¼"Wx32"H
RAVWP8- 8"D x 19aA"Wx32"H
RAVWP12- 12"Dx 19Vd'Wx 32"H
RAVWP15- 15"Dx 19Y¢"Wx32"H
Case
[] BUILD AND INSTALL THE
ZONELINE BASE PLATFORM
(,o sr ( r ; 2 _/_ n . x 2_)V_*'rain. square platfbrm.
NOTE: The platform must haxe a load-b(aring
capa(ily ot 175 lbs. mininaum.
2 ._j
access t4J
fordram Cutoutfor drain
n
2. Place lh( platform in the utilily closet with the
[bllowing clearance between it and lh( inlerior
surfhce of the walls/door/pan(l:
• 4" rain. fi-om flont of the case - Unit to be
installed through FRONT ot case
• 5" rain. fi-om flont of the case - [ 7nit to be
installed through SIDE of case
• 3" rain. fi-om two sides o_ the case
3, Align the platform with lh( op(ning of
the wall plenum an(1 s(cure to rile floor
using appropriate brack(ts and bohs.
18
Loading ...
Loading ...
Loading ...