Loading ...
Loading ...
Loading ...
Page |
9
Controlling the cabinet lighting
The interior cabinet light settings can be controlled
using the LIGHT button on the CONTROL PANEL. The
luminosity level will increase by one unit (displayed as
one LED light over the LIGHT button) every time the
button is pressed. When the level is already in “High”
(3 LED lite), the next press will reset the level to “None”
and no LED light will be displayed. When the door is
opened, the interior light will automatically illuminate to
its maximum intensity (High level) independently of the
setting on the control.
When the door is closed, the interior light will adjust
back to the setting indicated above the LIGHT button
as per following table:
LIGHT setting
Closed-Door
Cabinet Light Level
Non
e
Low
Medium
Hi
g
h
(same level as when
door is opened)
If the LIGHT preset is “None”, the interior lights will turn
on only when the door be opened and will dim off again
when the door be closed. These light level settings can
be used to conveniently display the contents of the Glass
Door Refrigerator even when the door is closed.
The factory default for closed-door light level setting is
“High”.
• Press the LIGHT button repeatedly to cycle between
the level settings.
• The interior lighting will temporarily adjust to the
selected setting for a few seconds. This provides a visual
sample of the selected level, before returning to the
open-door (maximum) lighting level.
Toe-Kick
The Toe-Kick itself can be removed for service or
cleaning (see “Cleaning behind the Toe-Kick” in the
next section).
1. Remove the stainless steel Toe-Kick by unscrewing
and removing the two front screws with a Philips
screwdriver.
Front
screws
2. You can remove the Toe-Kick by simply pulling it out.
3. To reattach the Toe-Kick, align the holes with the
support tab and screw the frontal screws in the same
position with a Philips screwdriver.
NOTE: Removal of the kickplate is not encouraged, but
if necessary, it is recommended to be done by an
authorized service personnel.
• Do not use abrasive or acidic cleaning agents and
solvents.
• Do not use scouring or abrasive sponges. The
metallic surfaces could corrode.
• Never clean the glass shelves in the dishwasher. The
parts may be damaged.
Cleaning the appliance
WARNING:
Never clean the appliance with a steam cleaner!
CAUTION:
Loading ...
Loading ...
Loading ...