Loading ...
Loading ...
Loading ...
Page |
5
Information concerning disposal
Disposal of packaging
The packaging protects your appliance
from damage
during transit. All utilized materials are environmentally
safe and recyclable. Please help us by disposing of
the packaging in an environmentally friendly manner.
Please ask your dealer or your local authority about
current means of disposal.
Disposal of your old appliance
Old appliances are not worthless rubbish! Valuable
raw materials can be reclaimed by recycling old
appliances.
WARNING:
1. Pull out the power plug.
2. Cut off the power cord and discard with the power
plug.
3. Remove the door from the appliance.
4. Do not allow children to play with the appliance
once it has spent its useful life. Danger of
suffocation!
5. Leave the shelves in place so that children may
not easily climb inside.
Refrigerators contain refrigerant and gases in the
insulation. Refrigerant and gases must be recycled by
professionals. Ensure that tubing of the refrigerant
circuit is not damaged prior to proper disposal.
Installing the appliance
For detailed installation instructions, please refer
to the Installation Guide provided with the
appliance.
Have a qualified technician install and connect the
appliance according to the enclosed installation
instructions.
NOTE: For detailed installation instructions, relevant
measurements and information, please see the
Installation Guide provided with this appliance.
WARNING:
Do not install this appliance:
-
Outdoors
- In an environment with dripping water
- In rooms where there is a risk of frost
It is recommended that a separate circuit serving only
your refrigerator be provided. Use an outlet that cannot
be turned off by a switch. Do not use an extension cord.
Transporting
The appliance is heavy and must be handled with
caution during transportation and installation.
Because of the weight and dimensions of the
appliance, at least two persons are necessary to move
the appliance into position securely and avoid injuries
to people or damage to the appliance.
WARNING:
While handling or moving the appliance avoid any
damaging to the tubing, risk of refrigerant leakage.
Installation location
A dry, well ventilated room is suitable as
an
installation
location. The installation location should not be
exposed to direct sunlight and not placed near a heat
source, e.g. a cooker, radiator, etc.
If installation next to a heat source is unavoidable, use
a suitable insulating plate or observe the following
minimum distance from the heat source:
▪
To electric or gas oven/range 1¼” (3 cm).
▪
To an oil or coal-fired cooker 11
13
/
16
” (30cm).
The floor of the installation location must not give
way; if required, reinforce floor. The appliance must be
upright and level to function correctly.
If the appliance seems unsteady there are 4 leveling
legs that can be adjusted to your preference.
Ventilation
The refrigeration unit is ventilated only at the Toe-
Kick in the base. Never cover that area or place
anything in front of it. Otherwise the refrigeration
cooling performance will be affected, and the unit must
work harder increasing power consumption.
Loading ...
Loading ...
Loading ...