Loading ...
Loading ...
Loading ...
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various functions of the oven as described below. Note: Control panel graphics may vary from those shown.
CLEAR PAD i Used to clear any function
previously entered except the time of day and
minute timer. Press CLEAR to stop cooking. Also
the CLEAR pad is used to activate oven door
lockout setting.
BAKE PAl_-Used to
select the bake
function.
BROILPAD i
Used to select the
variable broil
function.
CLEAN PADi
Used to select the
UP and DOWN ARROW PADS-- Used along with the
function pads to select oven temperature, cooking time,
stop time (when programming an automatic stop time),
time of day, clean time and minute timer.
CLOCK PAD i Used to
set the time of day.
FEATURE INDICATOR
LIGHTS i These light to show
use,
_'_/BAKE TIME PAD_ Used to_i_ enter the length of the baking
_ time (ifequipped).
_ _ STOP TIME PADi Used to
set the desired stop time for
baking, Can be used with
BAKE TIME to program a
delayed bake cycle (if
equipped).
OVEN, PREHEAT & LOCK LIGHTS*-- The "OVEN" light will glow each time the oven turns on to
maintain set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, TIMER PAD i Used to set or cancel the minute
or if the desired temperature is reset higher than the actual oven temperature. The "DOOR timer. The minute timer does not start or stop
LOCKED" light will flash when the oven door locks & unlocks or when using the self-clean cycle or cooking. Also, the TIMER pad is used to set the
the oven door lockout mode is activated. The indicator light will glow constantly after the door locks. Continuous Bake feature.
The oven can be programmed to BAKE,TIME BAKE, BROIL, SELF-CLEAN, CONTINUOUS BAKE and
set for OVEN LOCKOUT.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the controls can be programmed
for silent operation. Press and hold _. After 7 seconds, the controlwillbeep once. This willblock the controlsfrom sounding
when a pad is pressed. To return the sound, press and hold _ again for 7 seconds until the control beeps once.
Note: The controlwill return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press )." "appears in the display.
2. Press and hold the O until "HI" appears in the display.
3. Press and hold until °F or °C appears in the display.
4. Press the O or O' to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
9
Loading ...
Loading ...
Loading ...