Loading ...
Loading ...
Loading ...
GLASS TOUCH-ACTIVATED
ELECTRONIC OVEN CONTROL
C D
B
L,
[Bo,oIBm°"I::::J
--CONV_CT--
__E,_CONVECT__
Baked Meats Other
IOood lI oo4
--TIMER--
Set/ (f
© © © llst r, lo
A. EasyConvect conversion
B. Convection oven settings
C. Oven settings
D. Proof bread setting
E. Oven display
E Clock/time of day display
O P 0 N M L K J
G. Number pads
H. Start (control lock)
I. Off
J. Options selection pad
K. Clock set/start
L. Timer
M. Stop time
N. Cook time (length of
cooking time)
O. Self-clean
P Oven light (on/off)
Q. Warming drawer controls
When pressing any control pad function on the Electronic Oven
Control, use the pad of your finger to press the desired function.
Hold down the pad a few seconds, or until the desired function
appears in the display.
When entering multiple functions within one setting, pause briefly
between each control pad command. If a command pad is
pressed several times repeatedly, the pad may briefly stop
working. Wait a few seconds, and the pad should function again
as normal.
When the oven is in use, this display shows the oven
temperature, heat source(s) and start time. During Timed
Cooking, this display also shows a timed countdown and the
stop time (if entered).
If "Err" appears on the display, an invalid pad was pressed.
Press OFF and retry your entry. When the oven is not in use, this
display is blank.
The START pad begins any oven function except the Timer,
Control Lock and Sabbath Mode. If not pressed within 5 seconds
after pressing a pad, "START?" will appear on the oven display as
a reminder. If not pressed within 5 minutes after pressing a pad,
the oven display will return to inactive mode (blank) and the
programmed function will be canceled.
If a function has been started and a different function is selected,
"START?" will appear in the display after 5 seconds. If the START
pad is not pressed within 5 seconds, the oven display will return
to the active/already started function.
The Control Lock feature shuts down the control panel pads to
avoid unintended use of the oven.
The Control Lock feature may be used either when the range is in
use or turned off (for example, during cleaning).
The Control Lock is preset unlocked, but can be locked.
When the control is locked, only the TIMER SET/START, TIMER
OFF and OVEN LIGHT pads will function.
To Lock/Unlock Control: Before locking, make sure the oven,
the Timer and Timed Cooking are off. Press and hold the START
pad for 5 seconds until "CONTROL LOCK" appears on the
display. Repeat to unlock and remove "CONTROL LOCK" from
the display.
The OFF pad stops any oven function except for the Warming
Drawer, Clock, Timer and Control Lock.
This is a 12-hour clock.
1. Press CLOCK SET/START.
2. Press number pads to set time of day.
3. Press CLOCK SET/START
11
Loading ...
Loading ...
Loading ...