Loading ...
Loading ...
Loading ...
Required Ductwork Parts
The parts required for the exhaust air
system (elbows, lines, exhaust air
outlets) are not included in standard
delivery of the dryer (see the
Accessories section for information on
ordering parts.)
Professional installation of ductwork is
recommended.
Accessories
The following optional accessories for
your dryer may be obtained from
customer service (see page 26) or from
your local dealer. Please follow the
installation instructions supplied by the
appropriate manufacturer.
Side exhaust kit
part no. WTZ 1265
Note:
See notes on maximum number of
elbows on page 12.
D A special tool is required for cutting
the exhaust hole in the dryer side
panel.
For further information please
contact your local dealer.
Bottom exhaust kit
part no. WTZ 1270
Note:
See notes on maximum number of
elbows on page 12.
LP - Gas Kit
part no. WTZ 1280
The parts required for the LP version
can be obtained from your local dealer.
Please follow the installation
instructions supplied by the appropriate
manufacturer!
Note:
Dryer must be checked for proper
operation whenever the gas
connections have been broken.
Dryer rack
part no. WTZ1290
Use the dryer rack to dry washable
woolen textiles (e.g. sweaters) and
shoes.
Left hinge kit
part no. WTZ1260 for white
part no. WTZ1260S for solid silver tone
and for duo-tone color
The door is hinged on the right side at
the factory. The door catch can be
reversed if necessary. Please contact
your dealer or our customer service
team (see page 26)
Pedestal Mounting Kit
8 inch pedestal accessory number
WTZ 1295 for solid white color
WTZ 1295S for solid tone silver
WTZ 1295P for duo tone silver/white
15 inch pedestal accessory number
WTZ 1500 for solid white color
WTZ 1500S for solid tone silver
WTZ 1500P for duo tone silver/white
WTZ 15000 for duo tone
champagne/white
If mounting the dryer on the pedestal
follow the instructions supplied with the
pedestal before proceeding any further.
Mobile home kit
part no. WTZ 1275
Note:
Please check with the Authority Having
Jurisdiction in your area to verify if a gas
dryer can be installed in your mobile
home. Once that has been verified,
installation of the dryer shall conform to
the Manufactured Home Construction
and Safety Standard, Title 24 CFR, Part
3280 {formerly the Federal Standard for
Mobile Home Construction and Safety,
Title 24, HUD (Part 280)}, and/or
Standard CAN/CSA-Z240 MH.
The kit includes a means to secure the
dryer to the structure.
See page 11 "Exhaust Air Connection"
for the exhaust duct installation
instructions.
The exhaust duct must be securely
fastened to a noncombustible portion
of the mobile home structure and must
not terminate beneath the mobile
home.
An opening to the outside must be
provided during installation. Insure that
the free area of the opening for the
introduction of outside air is not less
than twice the area of the dryer exhaust
outlet or use at least a 5 inch diameter
exhaust or at least a 25 in2 square
exhaust duct for the opening.
13
Loading ...
Loading ...
Loading ...