Loading ...
Loading ...
Loading ...
EN - 8
Item Optional settings
AUTO STORE
(Automatic storage)
Press button
to open the automatic storage mode – six of the
strongest stations in the selected broadcast band will automatically be
stored in the channel presets: FM1, FM2, FM3 (l-6), AM1, AM2.
LOC ON/OFF (Local
reception – on/off )
To receive more radio stations or only stations with a strong signal, you
may set the sensitivity of the radio.
AREA (Region)
Select the respective country region for radio reception: USA; LATIN;
EUROPE; RUSSIA; M-EAST (Middle East); ASIA; JAPAN; AUST
(Australia)
CLOCK SET
(Clock settings)
Hour and minutes settings
CLOCK FORMAT Select the 12H or 24H time format
RGB
When LED AUTO is shown, the default colour is automatic colour; turn
the volume control dial to select a colour – the colour will change in the
following order: AUTO – GREEN – BLUE – RED – YELLOW – CYAN –
PURPLE – WHITE.
Attention: for the correct function and reception of the radio and RDS, it is necessary to set
the reception region.
Note: activated traffi c announcements (TA) mode scans for stations that are broadcasting
(indicator TP). If the tuned station does not have TP identifi cation, perhaps due to a weak
signal, the device will lower its volume and start scanning for a diff erent station that has
identifi cation.
Listening to the radio:
• Hold down for approximately 2 seconds to store the current stations in
memory.
• Short press to call up the stored station.
1. Repeatedly press button BND to set the broadcast band FM1, FM2, FM3, AM1 (MW1)
or AM2 (MW2).
2. Press button
to scan for stations.
Overview of RDS functions
The Radio Data System (RDS) is a service, which makes it possible for FM stations to
broadcast other digital information together with the standard program signal. Some
of them are listed below. It depends on the specifi c station, which data is used for
Loading ...
Loading ...
Loading ...