Maytag MHN30PNCGW0 Commercial Front Load Washer

INSTALLATION INSTRUCTIONS - Page 6

For MHN30PNCGW0. Also, The document are for others Maytag models: MHN30PD*, MHN30PN*

PDF File Manual, 68 pages, Read Online | Download pdf file

MHN30PNCGW0 photo
Loading ...
Loading ...
Loading ...
Electrical Requirements
Dangerous Voltage
Electric Shock Hazard
Plug into an earthed socket outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electric shock.
EARTHING iNSTRUCTiONS
This washer must be earthed. In the event of a malfunction
or breakdown, earthing will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-earthing conductor and an earthing plug. The
plug must be plugged into an appropriate outlet that is
properly installed and earthed in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
earthing conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly earthed.
Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
NOTE: Electrical safety standards: The manufacturer has
chosen compliance with EC/EN.60335 standards as the most
appropriate for this product.
[] Sound Pressure Level, Lpa: 58 dbA (uncertainty,
Kpa: +/-3.6 dbA)
[] A 220-240V, 50 Hz., fused electrical supply is required. A
time-delay 10-16A fuse or circuit breaker is recommended.
[] This washer is equipped with a power supply cord having
a 3 prong earthed plug.
[] To minimize possible shock hazard, the cord must be
plugged into a mating, 3 prong, grounding-type outlet,
grounded in accordance with local codes and ordinances.
If a mating outlet is not available, it is the personal
responsibility and obligation of the customer to have the
properly grounded outlet installed by a qualified electrician.
[] If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that the
earth path is adequate.
[] If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or a qualified person to
avoid a hazard.
[] Do not earth to a gas pipe.
[] Check with a qualified electrician if you are not sure the
washer is properly earthed.
[] Do not have a fuse in the neutral or earth circuit.
6
Loading ...
Loading ...
Loading ...