Loading ...
Loading ...
Loading ...
1919
USING GAS BURNERS
■ Check that the electricity is switched on to allow spark ignition.
■ Make sure that all controls are turned to “
” (burner o).
■ The gas ow to the burner is controlled by a tap incorporating a safety cut-o valve.
If the burner ame should go out for some reason, the safety valve will automatically
stop the gas ow. The switch of the electric ignition is incorporated in the knobs.
■ You control the ow by turning the knob indicator to line up with the following symbols:
– Symbol
: tap closed (burner o)
– Symbol
: High (maximum)
– Symbol
: Low (minimum)
■ You can control the temperature by the knob to “High” (maximum) from “Low” “Minimum”.
■ Other intermediate operating adjustments can be achieved by positioning the indicator
between the maximum and minimum aperture positions and never between the
maximum aperture and the “ ” (o) position.
■ To switch o, turn the knob clockwise until you hear the safety click - “
” (o) position.
■ Note that, if you are using a burner at the minimum setting, you turn the knob clockwise
past the maximum setting before reaching the o position.
■ Whenever lighting any of the burners produces an abnormal ame, switch that burner
o and relight using the minimum setting.
■ If after relighting the burner, the ame is still abnormal, turn the burner o and contact
our Customer Service Centre to obtain the nearest authorized Elba Appl. AUS Service
Agent.
■ In the case of a mains failure light the burner with a match or lighted taper.
■ Note: When the cooker top is not being used, check the gas knobs are in their closed
position and also close the cock valve on the gas bottle or the main gas supply line.
Figure 8a
Figure 8b
Loading ...
Loading ...
Loading ...