Loading ...
Loading ...
Loading ...
1212
GAS SUPPLY
■ This appliance is suitable for use
with Natural Gas or ULPG (Check
the “gas type” sticker attached to the
appliance).
■ For Natural Gas the gas supply must
be regulated to obtain a pressure of 1
kPa:
– with the two semi-rapid (SR) burners
operating at the maximum - model
NSL 460 NCM only;
– with the double-ring (DR) burner
operating at the maximum - model
NSL 590D NCM only.
■ For ULPG models connect the gas
supply directly to the appliance test
point adaptor (supplied with the
conversion kit) and ensure that the
supply pressure is regulated to 2.75
kPa.
■ Do NOT force the ”elbow“ rotation
prior to loosening nut.
■ Do NOT over tighten the nut at the
”elbow“.
1. After connecting the gas supply, check
the piping and connections for leaks
using a soap and water solution. The
presence of bubbles indicates a leak,
tighten or replace connections as
appropriate.
Warning: Do not use any naked ame
to check for leaks.
Gas connection for
NATURAL GAS
Gas inlet pipe
Gasket
Brass conical adaptor
(Thread tight: use
suitable seal)
Gas regulator
Test
point
Gas connection for
ULPG
Test point adaptor
Gasket
Gas inlet pipe
Test
point
Brass conical adaptor
(Thread tight: use
suitable seal)
Figure 4a
Figure 4b
Figure 4c
Loading ...
Loading ...
Loading ...