Loading ...
Loading ...
Loading ...
8
5. Once plastic anchors are in place, use the screws to secure the brackets
in place. Alternate turning all four screws on each bracket to prevent the
bracket from moving too much from the original location.
6. Lift the unit to access the adjustable feet at the back. Use a screwdriver
to remove the two screws between the feet and the back of the unit. If
these are not removed, they will prevent the feet from sliding into the
brackets.
7. Loosen the adjustable feet so that they can slide under the brackets. If
the feet won’t slide into the brackets, adjust them either direction until
the bracket can pass between the top of the adjustable foot and the
bottom of the fridge.
Loading ...
Loading ...
Loading ...