Loading ...
Loading ...
Loading ...
7
OPTIONAL ANTI-TIP BRACKET INSTALLATION
This unit comes with optional anti-tip brackets that help prevent sliding or
tipping. If you want to install them, follow these instructions:
1. You can use one (or both) of the anti-tip brackets. Brackets are meant to
be screwed into the floor for the back adjustable feet of the fridge to
slide and lock into.
2. If using both brackets, place the brackets on the floor and position them
in their final location before securing them to the floor with screws.
Brackets should be 22 ¼ inches (565mm) apart between each center of
bracket (red dots in each bracket below). Make sure the brackets are
lined up with each other so that both back feet can slide into them
equally. You may find it helpful to measure the distance between the
centers of the two back feet, just to be safe.
3. Please note: the brackets will stick out under the sides of the fridge once
installed, but not the back. Use the graphic below as a reference, in case
it affects your final placement.
4. While the brackets are in position on the floor, mark the position of all 4
holes on each bracket. Before drilling any holes, double check all
measurements and place the fridge near the brackets to check your
accuracy. Bracket openings should line up with the adjustable feet on
the back of the unit. Use a 5/16 drill bit to make holes for the plastic
anchors. Insert the plastic anchors.
Loading ...
Loading ...
Loading ...