Loading ...
Loading ...
Loading ...
14
USING YOUR ELECTRONIC CONTROL
Starting your clear ice machine:
Plug the ice machine into a 115 volt wall outlet,
(see page 5 for electrical information). Your appli-
ance is shipped from the factory in the "ICE" mode and will
begin start-up of ice production after the start-up routine.
Upon applying power to the unit, or after a power interrup-
tion, the Ice machine will perform a self-test, followed by a
harvest cycle to clear any in-process ice production. This
start-up routine, (“after power is applied to the unit”), takes
approximately 13 minutes to complete before an ice pro-
duction cycle starts.
If the appliance does not start, conrm the wall outlet has
power, and the control is in the "ICE" mode, (see Options
section below). Do not start the ice machine in "ECO"
mode. "ECO" mode should only be used after there is a full
bin of ice.
hours
ICE
1 4 6 8
OFF CLEAN
DOOR
ECO
days
"ON/OFF" icon : used for turning the appli-
ance on and off.
"MENU" icon : used to access optional func-
tions in the user interface.
"Clock" icon : used to enter the Delay start/
vacation mode.
"LOCK" icon : used to lock out functions in
the user interface.
Display area text:
Display icons:
ICE
ICE
OFF
DOOR
CLEAN
ECO
1
4
6
8
hours
days
Signies the appliance is on and producing
ice.
Signies the appliance is off
Signies a door ajar alarm condition.
Cleaning is recommended or the appliance
is in the clean mode.
Signies the appliance is in economical ice
production mode.
Figure 20
User interface display
On/off Menu Display area Light Delay timer Lock
When lit, this signies the delay start/vacation mode is opera-
tional.
Hours or days will be lit
Hours or days timer is set for
Delay start/Vacation mode:
The control display is covered with a clear plastic protec-
tive lm. This lm may be removed by carefully lifting at a
corner.
NOTE
"LIGHT" icon: used to turn the interior light
on and off, glass door models only.
Loading ...
Loading ...
Loading ...