Loading ...
Loading ...
3
EQUIPMENT SAFETY
WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:
• Use this unit only in the manner intended by the
manufacture r. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off at
service panel and lock service disconnecting means
to prevent power from being switched on
accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent
warning device, such as a tag, to the service panel.
• Installation work and electrical wiring must be done
by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated
construction.
• Sufficient air is needed for proper combustion and
exhaustion of gases through the flue (chimney) of
fuel burning equipment to prevent back drafting.
Follow the heating equipment manufacturer’s
guideline and safety standards such as those
published by the National Fire Protection Association
(NFPA), and the American Society for Heating,
Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
• When cutting or drilling into a wall or ceiling, do not
damage electrical wiring and other hidden utilities.
• Ducted fans must always be vented to the outdoors.
WARNING: FUEL (GAS) BURNING RANGES MUST BE
VENTED OUTDOORS USING, AT MINIMUM, METAL
DUCTWORK AND RANGE HOODS OF SUFFICIENT CAPACITY.
• Follow your fuel burning equipment manufacturer’s guidelines, as well as, all applicable safety
standards published by the National Fire Protection Association (NFPA), and the American Society
for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and your local code authorities.
Loading ...
Loading ...
Loading ...