Loading ...
Loading ...
Loading ...
4
INSTALLATION
Position the unit on a flat, level surface capable
of supporting the entire weight of the unit
when full. The unit contains four (4) adjustable
leveling legs. Turn the leg’s clockwise to raise and
counterclockwise to lower.
To install the handle, follow the instructions
below.
Remove the gasket right side.
Take out the screws from bag in cabinet. Put the
screws in the holes where the handle is to be
installed.
Align the handle with screws, tighten the screws
using a screw driver until the handle is both flush
and secured tightly against the door side. (DO
NOT over-tighten as this may cause damage to
the door surface.).
Put the screws on top of the door where the
handle is to be installed. Align the handle with
screws, tighten the screws using the screwdrivers.
1. Position the unit to allow free air flow through
the front grill.
2. Wipe out inside of the unit with a damp cloth.
LEVELING THE UNIT
LOCATION OF PARTS
INSTALLING THE STAINLESS STEEL HANDLE
ELECTRICAL CONNECTION
Improper use of the grounded plug can
result in the risk of electrical shock. If the
power record is cord is damaged, have it
replaced by a qualified or an authorized
service dealer.
WARNING!
Loading ...
Loading ...
Loading ...