Loading ...
Loading ...
Loading ...
11
INSTALLATION INSTRUCTIONS
Before Using Your Appliance
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
Wire Shelves (see details in “ PARTS & FEATURES”)
Retainer Bar
Instruction manual
Before connecting the Appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Appliance
This appliance is designed to be free standing only, and should not be recessed or built-in.
Place your Appliance on a floor that is strong enough to support the Appliance when it is fully
loaded. To level your Appliance, adjust the front legs at the bottom of the Appliance.
Allow 5 inches of space between the back and sides of the Appliance, which allows the
proper air circulation to cool the compressor.
Locate the Appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the Appliance not to
perform properly.
Avoid locating the Appliance in moist areas.
Plug the Appliance into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or
contact us ecoonefuture1@gmail.com.
After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before
placing food in the chiller or Appliance compartment.
Loading ...
Loading ...
Loading ...