Loading ...
Loading ...
Loading ...
NOTE
Make sure the hose is secure so there are
no leaks. Direct the hose toward the drain,
making sure that there are no kinks that
will restrict water flow. Place the end of the
hose into the drain making sure the end of
the hose is directed downward. When the
continuous drain hose is not used, ensure
that the corresponding drain plug and knob
are securely installed to prevent leaks.
Water drainage
• During DRY mode, remove the upper drain plug from
the back of the unit and install the drain connector
(5/8” universal female adapter) with a 3/4“ hose
(not included). For models without the drain connector,
attach the drain hose to the connector. Place the end of
the hose in the drain area you’re using.
Remove the
drain plug
Continuous
drain hose
• When the water level of the bottom tray reaches
a predetermined level, the unit beeps 8 times.
The digital display shows “P1.” At this time the
air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate (this is normal). Carefully move
the unit to a drain location, remove the bottom
drain plug and let the water drain away. Reinstall
the bottom drain plug and restart the machine until
the “P1” symbol disappears. If the error repeats, call
for service.
Bottom drain plug
NOTE
Be sure to reinstall the bottom drain plug firmly to
prevent leakage before using the unit.
Operating
Instructions
Page 11
Loading ...
Loading ...
Loading ...