Loading ...
Loading ...
Loading ...
H2O DMX PRO DMX Control
Universal DMX Control: This function allows you to use a Elation®
universal DMX-512 controller to control the individual lasers, rotation
and macros. A DMX controller allows you to create unique programs
tailored to your individual needs.
1. The Hypnotic RGB is a 3 channel DMX fixture. See page 12 for
detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-6 as well as the set-up specifications that are includ-
ed with your DMX controller. Follow the instructions on page 8 to
set the DMX address.
3. Use the controller’s faders to control the various DMX fixture traits.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
5. For help operating in DMX mode consult the manual included
with your DMX controller.
Focusing Lens: The lens can be focused by turning it clockwise or
counter-clockwise to focus the lens to your desire.
©American DJ Supply® - www.americandj.com - H2O DMX PRO Instruction Manual Page 11 ©American DJ Supply® - www.americandj.com - H2O DMX PRO Instruction Manual Page 12
Channel Value Function
1 MASTER DIMMER
1 - 255 0% - 100%
2 ROTATION
0 - 9 NO ROTATION
10 - 120 CLOCKWISE ROTATION FAST - SLOW
121 - 134 NO ROTATION
135 - 245 COUNTER-CLOCKWISE SLOW - FAST
246 - 255 NO ROTATION
3 COLOR
0 - 10 WHITE
11 - 21 WHITE & ORANGE
22 - 32 ORANGE
33 - 43 ORANGE & GREEN
44 - 54 GREEN
55 - 65 GREEN & BLUE
66 - 76 BLUE
77 - 87 BLUE & YELLOW
88 - 98 YELLOW
99 - 109 YELLOW & PURPLE
110 - 120 PURPLE
121 - 127 PURPLE & WHITE
128 - 186 CLOCKWISE COLOR ROTATION
FAST - SLOW
187 - 196 STOP
197 - 255 COUNTER-CLOCKWISE ROTATION
SLOW - FAST
H2O DMX PRO DMX Values & Traits
H2O DMX PRO Master-Slave Configuration
Master-Slave Conguration This function will allow you to link up
to 16 units together and operate without a controller. In Master-Slave
operation one unit will act as the controlling unit and the others will
react to the controlling units programs. Any unit can act as a Master or
as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The rst unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit press the MENU button until “SLND” is dis-
played, and press ENTER. Press the UP or DOWN buttons so that
“MAST” is displayed and press ENTER.
3. On the slave units press the MENU button until “SLND” is dis-
played, and press ENTER. Press the UP or DOWN buttons so that
“SL 1” is displayed and press ENTER.
4. The slave units will now follow the Master unit.
H2O DMX PRO UC3 Control
Loading ...
Loading ...