ADJ H2O DMX PRO IR User Manual

Loading ...

H2O DMX PRO System Menu

2. Either “ON” or “OFF” will now be displayed. Press the UP or

DOWN buttons to select “ON” to keep the LED display on at all

times, or “OFF” to allow the LED display to turn o after 2 min-

utes. Press any button to turn on the LED display again.

3. Press ENTER, and then press and hold the MENU button for at

least three seconds

to conrm.

DISP - This will “ip” the LED display

1. Press the MENU button until “DISP” is displayed, press ENTER.

2. Either “dISP” or “dSIP” will now be displayed. Press the UP or

DOWN buttons to select one or the other.

3. Press ENTER, and then press and hold the MENU button for at

least three seconds to conrm.

MANU - This function will let you manually test the

color wheel, water wave, and dimmer. In this function you

can also manually adjust and set the color wheel, rotation

speed, and dimmer.

1. Press the MENU button until “MANU” is displayed, press

ENTER.

2. Use the UP or DOWN buttons to scroll between “COLO”

(Color), “WAVE” (Water Wave), or “DIMM” (Dimmer). Select the

function you would like to test and press ENTER.

3. Use the UP or DOWN buttons to adjust the values to test/

check the function. Press the MENU button after testing the

functions.

If you would set your desired color, rotation speed, and dimmer,

press the ENTER button after each submenu is adjusted.

Example: “COLO” is displayed, press ENTER. Make your

adjustments using the UP or DOWN buttons until your desired

color projected. After you have found your desired color, press

ENTER. Scroll to the next function, adjust, and press ENTER.

4. After you have made your desired settings press and hold the

MENU button for at least 3 seconds.

TEST - This function will run a self test program.

1. Press the MENU button until “TEST” is displayed, press

ENTER.

2. The xture will now run a self test. Press the MENU button to

exit.

FHRS - With this function you can display the running

time of the unit.

1. Press the MENU button until “FHRS” is displayed, press

ENTER.

2. The running time of the xture will now be displayed. Press

the MENU button to exit.

VER - This will display the software version

1. Press the MENU button until “VER” is displayed. Press the

ENTER button and the software vesion will be displayed.

2. Press the MENU button to exit.

RSET - This will display the software version

1. Press the MENU button until “RSET” is displayed. Press the

ENTER button and the unit will reset itself.

©American DJ Supply® - www.americandj.com - H2O DMX PRO Instruction Manual Page 9 ©American DJ Supply® - www.americandj.com - H2O DMX PRO Instruction Manual Page 10

H2O DMX PRO System Menu

Loading ...

ADJ H2O DMX PRO IR

User Manual - Page 5