ADJ H2O DMX PRO IR User Manual

Loading ...

©American DJ Supply® - www.americandj.com - H2O DMX PRO Instruction Manual Page 7

H2O DMX PRO System Menu

On-Board System Menu.

The H2O DMX PRO comes with an easy

to navigate system menu. This next section will detail the functions of

each command in the system menu. Please read the next section

thoroughly!

To access the main menu press the MENU button. Press the UP or

DOWN buttons until you reach function you wish to change. When you

reach the function you wish to change press the ENTER button. When

a function is selected use the UP or DOWN buttons to change the func-

tion settings. Once your changes are made press the ENTER button,

and then press and hold the MENU button for at least three seconds

to conrm and lock the change into the system memory. If the MENU

button is not pressed and held within eight seconds the xture will

automatically conrm and lock the change into the system memory. To

exit without making any changes press the MENU button.

H2O DMX PRO System Menu

ADDR - DMX Address Setting via control board -

1. Press the MENU button until “ADDR” is displayed, press

ENTER.

2. “X” will now be displayed, “X” represents the displayed

address. Press the UP or DOWN buttons to nd your desired

address.

3. Press ENTER to conrm, then connect your DMX controller.

SLND - This will let you set unit as a master or a slave in

a master/slave conguration.

1. Press the MENU button until “SLND” is displayed, press

ENTER. Either “MAST” or “SL 1” will be displayed.

2. Press the UP or DOWN buttons until your desired setting is

displayed, press ENTER to conm.

LED - With this function the LED display will turn off after

2 minutes.

1. Press the MENU button until “LED” is displayed, press ENTER.

Loading ...

ADJ H2O DMX PRO IR