Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Glass-CeramicCooktop
Cleaning
5. After scraping with the razor scraper,
use the scrub sponge to remove any
remaining residue
6. For additional protection, after all
residue has been removed, polish the
entire surface with Cooktop Cleaning
Creme ®and a paper towel.
NOTE: Razor blade is packed
inverted for safety reasons. Prior to
use, the blade must be rotated and
reinserted into sloL
...... : : ....... _1I
_ MPORTANT: Using a
razor scraper will not
damage the surface if the
45° angle is maintained. Do
not use a dull or nicked razor blade
on your cooktop. Store the razor
scraper out of reach of children.
_,,r i J, ' , ,1111_ i iii':
Metal marks and scratches:
1. Be careful not to slide pots and
pans across your cooktop. It will
leave metal markings on the
cooktop surface.
These marks are removable using the
cleaning cream with a scrub sponge
and/or razor scraper.
2. If pots with a thin overlay of aluminum
or copper are allowed to boil dry, the
overlay may leave black discoloration
on the cooktop
This should be removed
immediately before heating again
or the discoloration may be
permanent.
WARNING: Carefully check the
bottom of pans for roughness
that would scratch the cooktop
Damage from sugary spills and
melted plastic:
1. Turn off all surface units,, Remove
hot pans.
2. Wearing an oven mitt:
a. Use the razor scraper to move
the spill to a cool area on the
cooktop,
b. Remove the spill with paper
towels.
3. Any remaining spillover should be
left until the surface of the cooktop
has cooled,
4. Don't use the surface units again
until all of the residue has been
completely removed.
NOTE: If pitting or indentation in the
glass surface has already occurred,
the cooktop glass will have to be
replaced In this case, service will be
necessary
12
Loading ...
Loading ...
Loading ...