Loading ...
Loading ...
Loading ...
10
WIRING
Wrap electrical tape (not included) around each
individual clip (CC) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of box
from the black and blue connections.
Gently push wires and clips (CC) into outlet box.
2.
CC
CC
2
CC
3
Gently slide remote control receiver (Y) flat-side up
into mounting bracket (C). Turn spliced/taped wires
upward and gently push wires into outlet box. Let
antenna from remote control receiver (Y) hang to the
side.
NOTE: The remote control included with this fan
meets the following requirements:
a. Not for use with solid state fans.
b. Electrical rating: 120V / 60 Hz;
motor amps:1.25 MAX.;
light watts: 190
(Incandescent only)
Should you choose to use a different remote control
with this fan, it must also meet these same
requirements.
3.
Antenna
A
Y
C
Loading ...
Loading ...
Loading ...