Loading ...
Loading ...
Loading ...
Fifteen seconds later, the Display will return to current time of day and the Indicator
Word TIMED will appear in the Display.
li O'O0 Lgs.
8. Touch Stop Time Pad.
Indicator Words STOP TIME will flash. Display will show the calculated stop time
based on current time of day and cook time.
Note: Probe set temperature wLIIcontrol the actual bake time. Probe temperature,
not stop time, will turn oven off when food is done. Stop time is programmed for
the purpose of computing start time.
9. Touch the appropriate number pads to enter stop time.
A stop time can only be accepted for later in the day. If an unacceptable stop time
is entered, "Err" will flash briefly in the Display and then Display will return to
previous acceptable Stop Time.
Example: If at 10 o'clock you set the oven for a probe temperature, for 325 °
convection roasting and 2 hours and 30 minutes cooking time, the calculated stop
time would be "12:30". The Display would show:
112-3oo .I
If you want the stop time to be 1 o'clock, touch the number pads "1,0,0". After
five seconds, the Display will briefly display the start time. Thus, the Display would
show:
After five seconds, the Display will return to current time of day, thus showing:
II 0:0019s ]
When selected temperature has been reached, the oven will shut off and a chime
will sound four times. Plus, the actual probe temperature will flash and the word
"End" will be in the Display. These words will remain in the Display and a chime
will sound every minute for ten minutes or until the Cancel Off Pad is touched. If
the probe is not removed, a beep wilt sound continuously until the probe is
removed.
! IMPORTANT 1
0 To recall a selected temperature or time: Touch the appropriate function pad. /
To change oven temperature set: Touch appropriate pad and touch the]
appropriate number pads to enter new desired temperature. /
If more than five seconds elapse between touching a function pad and touching)
a number pad, the on-going program returns to the Display. J
24
Loading ...
Loading ...
Loading ...