Loading ...
Loading ...
3
EN
• Before you begin the installation of the product, it is important that you confirm the availability of
Wi-Fi as well as the signal level at the desired installation location.
• Note that Wi-Fi quality can vary significantly at different locations around the home due to
environmental factors such as home construction type and wireless interference from other
electronic devices.
TO CHECK WIFI COVERAGE
1 Connect your phone to the 2.4GHz Wi-Fi network band of your internet/broadband router.
Note: The Swann Floodlight Security Camera will only connect to a 2.4GHz network.
2 Place your phone where you are planning to install the floodlight unit. If you have Wi-Fi connection
on your phone, the camera will also likely be able to obtain Wi-Fi connection. Check the Wi-Fi icon
on your phone. We recommend a minimum of 1 bar showing on your phone's Wi-Fi icon as shown
below. Further testing should be performed if the Wi-Fi signal strength is only 1 bar.
PREINSTALLATION CHECK
WIFI COVERAGE AVAILABILITY
0 1
!X
Number of bars indicate
Wi-Fi signal strength
ExcellentGoodFairPoorNo connection
2 3 4
Loading ...
Loading ...
Loading ...