Loading ...
Loading ...
Loading ...
Usingthe clock and timer.
Make sure the clock is set to the
correct time of da_
ToSet the Clock
The clock must be set to the conect time
of day fin"tile m_tomatic oven tinting
tractions to work properly. Tile time of
day cannot be changed during a timed
baking or sell-cleaning {ycle.
[] Press tile CLOCKpad.
[] Press tile number pads.
[] Press tlle STARTpad.
KITCHEN []
TIME
Ttie t#ner is a mflTutet#ner onl_
Ttie timer does not control oven
operations. Ttie maximum setting on
ttie timer is 9hours and59 mhTutes.
To Set the Timer
[]
[]
Press the KITCHENTIMERON/OFF
pad.
Press the number pads until tile
atllotln[ of tiitle rot] wan[ shows ill
the displ W. For example, to set 2
hours and 4,5minutes, press 2, 4 and
5 in that order. Ify{)u make a mistake
press tile KITCHENTIMERON/OFF
pad and begin again.
Press the STARTpad.
When tile timer reaches .'/70,
tile conuol will beep 3 times
followed by one beep eveU 6
secondsuntil tile KITCHENTIMER
ON/OFFpad is pressed.
The 6 second tone can be canceled by
fi)llowing tile steps in the Special features
of your oven control section under Tonesat
the End of a Timed Cycle.
NOTE:Onsomemodelsthetimecountsdown
/?nmedlate/ywhentheSTARTpadispressedThe
tYnerisactuallycountingdowninsecondsthat
arenotshownonthedisplayuntilthelastminute.
To Reset the Timer
If the display is still showing tile time
remaining, you may change it by pressing
the KITCHENTIMERON/OFFpad, then
press the number pads until the time you
want appears in the display.
If the remaining time is not in tile display
(clock, delay start or cooking time are in
tile display), recall tile remaining time by
pressing tile KITCHENTIMERON/OFFpad
and then pressing tile number pads u)
enter tile new time you want.
ToCancel the Timer
Presstile KITCHENTIMERON/OFF
pad t_d(e.
12
Loading ...
Loading ...
Loading ...