Loading ...
Loading ...
Loading ...
59
Remote Control Installation (cont.)
Connecting the Remote Control to the Water
Heater:
Ensure that the power to the water heater has
been disconnected.
Loosen the one screw located on the remote
control connection cover. The connection cover is
made of white plastic.
NOTICE:
DO NOT REMOVE FRONT PANEL. Remote control
wires are connected on the bottom of the unit.
There are no accessible remote control terminals
inside the water heater.
Connect the remote control extension cables from
the remote control to the remote control connection
terminals.
NOTICE:
The remote control wire connection terminals are
not polarity-sensitive.
Firmly tighten the terminal screws by hand.
Secure the remote control extension cable on the
hook located on the side of the remote control
connection base.
Reinstall the remote control connection cover and
secure with the one screw.
Switch on the power supply to the water heater.
Check for proper operation of the remote control
and the water heater.
Remote Control
Connection Cover
2
1
3
4
5
6
7
INSTALLATION INSTRUCTIONS
Electrical
Loading ...
Loading ...
Loading ...