Loading ...
Loading ...
Loading ...
18
CARE & MAINTENANCE (CONT.)
8. Detach the outer water outlet valve from
the tank by rotating it counterclockwise.
[Figure 5.4]
9. Rinse all parts (except the outside of the
base) with room temperature water.
10. To descale the humidifier (remove
mineral buildup):
a. Remove the water filter and the
water outlet valve from the tank.
Remove the noise silencer and
absorption pad from the base. Keep
the mist tube and mist channel in
place.
b. Fill the tank with 3 US cups / 710 mL
of distilled white vinegar.
c. Replace the tank cover and swish
the vinegar around the tank.
d. Place the tank on the base and soak
for 15–20 minutes. Vinegar will drain
into the base chamber and loosen
scale (mineral buildup) in the tank
and in the base chamber (including
the transducer and float).
e. Remove the tank, remove the tank
cover, and pour out any vinegar.
f. Remove the float from the base
chamber by pulling up the larger
side of the float and pulling the shaft
out from the float brackets. One
side of the float brackets is open
(U-shaped) to allow the shaft to be
removed. [Figure 5.5]
g. Place the float, water filter, water
outlet valve, aroma box, and noise
silencer in a container. Fill with
enough vinegar to cover them. Soak
for 15–20 minutes.
h. Use a soft cloth and the included
cleaning brush to remove scale from
all parts. [Figure 5.6]
i. Rinse all parts until any vinegar smell
is completely gone.
Figure 5.5
Figure 5.4
Do not allow liquid
into the air outlet
Figure 5.6
11. Dry all parts with a cloth. Make sure
all parts are completely dry before
reassembling or storing.
Loading ...
Loading ...
Loading ...