Troy-Bilt 13AX60TG766 Super Bronco Lawn Tractor

Operator’s Manual - Page 15

For 13AX60TG766. Also, The document are for others Troy-Bilt models: 60TG

PDF File Manual, 48 pages, Read Online | Download pdf file

13AX60TG766 photo
Loading ...
Loading ...
Loading ...
_i iii
NOTE:The deckwheelsarean anbscalp featureof the 1, Ifthe bladesare engaged,placethe PTO(Blade
deckand are notdesignedto supportthe weightof the Engage)leverin thedisengaged(OFF)position,
cuttingdeck, 2, Turnthe ignitionkeycounterclockwiseto the STOP
Referto Leveling the Deck on page 18of this manual position,
for moredetailedinstructionsregardingvariousdeck 3, Removethe key from the ignitionswitchto prevent
adiustments, unintendedstarting,
Starting the Engine
.,_ilil_l WARNING: Do not operate the
tractor if the interlock system is
malfunctioning. This system was
designed for your safety and
protection.
NOTE:Referto the TRACTORSET-UPon page8 of this
manualfor GasolineandOilfill-up instructions,
1, insert the tractorkey intothe ignitionswitch,
2, Race the PTO(BladeEngage)leverin the disem
gaged(OFF)position,
3, Engagethe tractor'sparkingbrake,
4, Activatethe chokecontrol,
5, Turnthe ignitionkey clockwiseto the STARTposition,
Afterthe enginestarts, releasethe key,it will returnto
the ON position,
IMPORTANT:Do NOTholdthe key in the STARTposi-
tionfor longerthan ten secondsat a time,Doingso may
causedamageto your engine'selectricstarter,
6, Afterthe enginestarts,deactivatethe chokecontrol
andplacethe throttlecontrolin the FASTposition,
NOTE:Do NOTleavethechokecontrolon whileoperat-
ingthe tractor,Doingso will result in a "rich" fuelmixture
andcausethe engineto run poorly,
Stopping the Engine
Driving The Tractor
WARNING: Avoid sudden starts,
e×-cessive speed and sudden
stops.
WARNING: Do not leave the seat
of the tractor without first placing
the PTO (Blade Engage} lever in
the disengaged (OFF} position,
depressing the brake pedal and
engaging the parking brake. If
leaving the tractor unattended,
also turn the ignition key off and
remove the key.
1, Depressthe brakepedal to releasethe parkingbrake
and letthe pedalup,
2, Movethe throttleleverinto the FAST(rabbit)position,
IMPORTANT:Do NOTuse theshift leverto changethe
directionof travelwhenthetractoris inmotion,Always
usethe brakepedalto bringthe tractorto a complete
stopbeforeshifting,
3, To moveforward,placethe shift leverin the FOR-
WARDposition,thenslowlydepressthe drivepedal
untilthe desiredspeedis achieved,
4, To movein reverse,placethe shift leverin the
REVERSEposition,checkthatthe areabehindis
clear thenslowlydepressthe drivepedal
WARNING: if you strike a foreign
object, stop the engine, discon-
nect the spark plug wire(s)
and ground against the engine.
Thoroughly inspect the machine
for any damage. Repair the
damage before restarting and
operating
15
WARNING
Do not operate the
tractor if the interlock
system is malfunction-
ing. This system was
designed for your
safety and protection.
if you strike a foreign
object, stop the
engine, disconnect
the spark plug wire(s)
and ground against
the engine. Thoroughly
inspect the machine
for any damage. Repair
the damage before
restarting and operat-
ing.
Do not leave the seat
of the tractor without
first placing the PTO
(Blade Engage) lever in
the disengaged (OFF)
position, depressing
the brake pedal and
engaging the parking
brake. If leaving the
tractor unattended,
also turn the ignition
key off and remove the
_ey.
Loading ...
Loading ...
Loading ...