Loading ...
Loading ...
Loading ...
9
Operating Instructions
STEPS TIPS IMPORTANT
5. Add wash
products to
dispenser.
• Water conditioners, detergent boosters
and enzyme products may be added with
detergent.
• See
Adding Laundry Products
for detailed
information on the use of the product
dispensers.
• See
Adding Laundry Products
for detailed
information on the use of various wash
products (detergent, bleach, stain treat-
ment, fabric softener, etc).
Follow manufacturer’s in-
structions and recommen-
dations when using wash
products.
Open and close the dis-
penser drawer slowly.
Closing the drawer too
quickly could result in early
dispensing of the bleach or
fabric softener.
6. Select the
cycle and
settings for
the load.
• See
Cycle Selection, Cycle Settings, and
Cycle Options
for detailed descriptions of
cycle controls.
• See
Cycle Setting Charts
to determine
which settings are available for each
cycle.
• To provide the best care, not every setting
or option is available with every cycle. If
a setting or option is not available for the
cycle selected, the indicator will not light.
Follow fabric care label in-
structions on items to
be washed.
Make sure that the PODS
®
option is selected when
using models that have a
separate detergent pack
compartment. See Adding
Laundry Detergent to the
Adaptive Dispenser™
7. Start the
washer.
• Close the door and press start/pause.
The washer will not operate with the door
open. “CLOSE DOOR” will be displayed
as a reminder to close the door.
• To add a forgotten item to the washer
any time during the wash portion of the
cycle, press start/pause. When the door
unlocks, open the door, add the item,
close the door and press start/pause to
resume cycle.
• To change settings or options after the
cycle has begun, press start/pause,
change the settings, and then press
start/pause. If the cycle is not paused
first, the unit will emit several beeps when
the buttons are pressed but no changes
to the cycle will be applied.
• To change the cycle once the cycle has
begun, press cancel to cancel the cycle,
select the new cycle, and press start/
pause to begin the new cycle. Changing
a cycle selection without cancelling the
current WILL NOT change the cycle.
• To cancel a cycle, press cancel.
• A signal will sound at the end of the cycle
if the chime option is not set to mute.
DO NOT force door open.
As a safety measure, the
door will automatically lock
during the entire wash
cycle. Pause or cancel
the wash load to unlock
the door.
If the cycle is interrupted
during spin, the door lock
will not release until the tub
has stopped spinning.
If the water level is above
the bottom of the door
opening/flexible door gas-
ket, the lock will not re-
lease.
8. Remove
items from
washer
when cycle
has ended.
• Remove items when the cycle ends and
place in dryer, line dry or dry flat as di-
rected on the fabric care label.
Excess wrinkling, color
transfer or odors may
develop in items left in the
washer after the cycle has
ended.
PODS
®
is a registered trademark of Procter & Gamble Company, Cincinnati OH, used under license by Electrolux.
Loading ...
Loading ...
Loading ...