Loading ...
Loading ...
Loading ...
mnteriorCleaningoAs Required
1 Disconnect power to the wine cooUer.
2 Remove racks if desired, see WINE RACK REMOVAL/INSTALLATION.
3 Wipe down the interior with a soUution of non-abrasive mild detergent and
warm water.
4 Rinse with cUear water.
5 Reconnect power to the unit.
CondenserCleaning- Every3 Months
i ii' "_
Figure 25
To remove and replace the grille for access to
the condenser fins foUlow this procedure:
1. Remove the controU knob by grasping the
knob and pulling straight off (see
Figure 25).
2. Remove the screws at each end of the
grille.
3. Remove the grille.
4 Clean the condenser coil using a brush or vacuum cUeaner. Do not touch.
5 Position the grille to align the screw hoUes with the cabinet.
6 Insert the grille screws and tighten being careful not to over tighten.
7 Install the control knob by aligning the flat of the control knob with the flat on
the shaft. Push firmly.
Loading ...
Loading ...
Loading ...