Loading ...
Loading ...
Loading ...
4 tf door edge opposite the Nnges needs to
move up, move plate toward outside of
door. tf door edge needs to move down,
move plate toward inside of door (see
Figure 16). Repeat until top edge of door is
parallel with top of cabinet and tighten
screws securely.
5 After adjustment is complete, remove the
door closers from the bottom hinge, clean
thoroughly and apply petroleum jelly to the
mating surfaces of the closers (see
Figure 17). Be sure that bosses on closers
align with holes in Mnge and hinge plate.
Mount door and install top hinge pivot pin.
MOUNTING _ IS NOTCH
HOLES _
RAISE _ LOWER
OUTSIDE OUTSIDE
DOOR EDGE DOOR EDGE
CLRCOOOla
DOOR
BOSS
Figure 17 UL3!2
Loading ...
Loading ...
Loading ...