Loading ...
Loading ...
Loading ...
STARTING/STOPPING THE SAW
See Figure 10,
Tostart thesam Depressthe switch trigger.
Ah_aysletthe b_adereachf,j_)speed,then gu)dethe saw
intotheworkp]ece.
_1_ WARNING: Theb)adecomingin contact w_ththe
workp]ese beforeIt reachesfull speedcould cause
the saw to "kickback" towardsyou resultingin
serious personalinjury.
Tostop the saw: Release the switch trigger.
NOTE: Allow the blade to come to a complete stop before
removing saw from workpleoe.
WARNING; Nways unplugthetoot whenchang-
[ngoperationsettings or whenthe tool is not inuse.
Failure1ounplugthe toolmay resultin accidentaK
starting and sedouspersona_Injury.
ADJUSTING BLADE DEPTH
See Figure11.,
Alwayskeepcorrectblade depthsalting. Thecorrect
blade depth settingfor al!cutsshoutd notexceed 1/4in,
belowthe matefia!being cut.Morebtadedepthwilt
increasethechance of kickbackend cause thecut to be
rough.For moredepthof cut accuracy,a scale islocated
ontheupper blade guard.
II Unplugthesaw.
m Loosendepthadjustmentknob.
i Determinethe desireddepth of cut.
m Locatedepth of cut scaleon backof upperblade
guard.
aNHoldbaseflat agair_._'ttheworkpieceand reiseor lower
saw _nti{the indicator markon bracketalignswith
notch on bladeguard°
BI Tighten depth adjusb'nentknobsecurely.
DEPTHOFCUT
Fig. 10
Fig. 11
15
Loading ...
Loading ...
Loading ...