Loading ...
Loading ...
Loading ...
Care & Cleaning
To Raise and Lower the Top for Cleaning
1. Remove burner grates and spillover bowls. Set aside.
2. Grasp the sides of the cooktop and then liftfrom the front.
3. Liftthetep high enough toallowthe supportredstosnap intoplace.The Lift-up rods willsupportthetep initsraised position.
4. Clean underneath using hot,soapywater and a clean cloth;then, dry.
5. To lower the range top, grasp the front comer ofeach side of the top while pushing back on each red with the heel of your
hand. This will release the notched support. Hold the range top and gently slide the range top down tothe range.
TO Remove and Replace Burners for Cleaning
To Remove Burners
1. Remove shipping screws with a Phillips Head screwdriver. See illustration for screw locations.
2. Tilt the burner at the end closest to the support bar untilthe locater tab is released (front burners tilt right, rear burners
tilt left). Move the burner toward the back of the range. This will separate it from the gas valve at the front of the
range.
WhenI W ri"gt"O
grasp the sides with fingertips 0nlyi Be
careful not to pinch fingers. Also, DO
NO3" drop or bend the rangetop when
raising or lowering. This COulddamage
i
Support
Bar
To Replace Burners
1. Slide the burner tube over the gas valve at the front of the range (front burners fit over the right valve, rear burners
fit over the left valve on each side of the range).
2. Tilt burner so that the locating tab will slide into the slot on the support bar. Make sure burners are properly seated
on support bar and are level.
3. Replace shipping screws if desired.
Iflv_V-'_:t_II_celDO NOT turn the burners on when the cooktop is raised for cleaning. Be sure that the top is completely
lowered and securely in place before turning on the burners.
12
Loading ...
Loading ...
Loading ...