Loading ...
Loading ...
Loading ...
12
Installation
For low quick-change mechanisms below 145 mm
Use the lower drilled holes.
15 x 13 x 28 x 3
Slide the washers onto the swing arm.
(The washers regulate the height. As a default setting, slide
15 washers to the end of the swing arm).
5 x 13 x 28 x 3
Guide the swing arm through the pipe on the spring holder.
1 x 3
Secure using washers and
R-pin.
Insert the spring tine through the front drilled holes.
Press the rear part of the
spring tine together and guide
it through the second drilled
hole.
Loading ...
Loading ...
Loading ...