Loading ...
Loading ...
Loading ...
Installation
6 Installation
6 x 16.5 x 30 x
42.5
For high quick-change mechanisms above 145 mm (meas-
ured from the lower edge of the quick-change mechanism
to the ground)
Push the bolt with washer through the drilled hole in the
spring holder. Use the upper drilled holes.
3 x M10 x 30
3 x 16.5 x 25 x 2
Place the plastic washer
onto the bolt.
3 x 20.5 x 25 x 2
Guide the spring holder and bolt through the drilled hole in the
parallelogram and push another plastic washer onto the bolt.
3 x M10
Install using a washer and nuts (do not tighten the nuts).
3 x 10.5 x 30
x 2.5
11
Loading ...
Loading ...
Loading ...